Can you start a snowblower without a key?

You most likely have a secondary way to shut off engine at the throttle control. You should be able to get one of these keys at any small engine shop or a sears parts center, but again you really do not need it.

Do you need a key to start a snowblower?

A snowblower key is an essential part of any snowblower. Unfortunately, not all snowblower keys are universal, but you can buy universal sets that will fit most standard snowblowers. … This key is integral in starting your snowblower’s engine, similar to any car.

What does snowblower key do?

Plastic Keys are designed to open the ground circuit contacts to the ignition coil when they are inserted. … When removed, the ground circuit contacts come back together and ground the engine ignition coil and prevent the ability to start.

Can you over prime a snowblower?

Priming the engine moves fuel through the fuel lines and into the carburetor. Our Toro snowblower recommends pressing the primer button twice. We’ve found it actually requires more like 8-10 pumps to get going. Be careful not to over-prime, however, since it can flood the engine.

What happens if you run a snowblower with the choke on?

Running the snow thrower with the choke on should not do any permanent damage. When the choke is on it provides the engine with more fuel than it needs. When the spark plug gets soaked it will not spark correctly and ignite the fuel. If this is the case, the spark plug will have to be replaced.

IT IS INTERESTING:  What is a two stage snow blower?

Can you use a regular extension cord to start a snowblower?

Your winter extension cord needs to be able to handle the rated amps of your snowblower. … The numbers don’t need to match exactly, but generally, a 12-gauge cord 50′-100′ long will safely handle equipment using 10-15 amps of power.

Blog about special equipment