What is the best fluid for tractor tires?

Rim Guard Beet Juice is the optimal tire ballast for both new and antique farm tractors, front-end loaders, commercial back hoes, skid steers, all-terrain forklifts, road graders, compactors/rollers and all types of utility tractors.

What should I fill my tractor tires with?

In general, you’ll want to limit ballast to 40 percent to 75 percent of tire capacity. Michelin suggests a 75 percent maximum while John Deere says 90 percent is acceptable. Here’s a step-by-step guide to adding tire ballast: Use axle supports to take the weight off the tire, then deflate it.

What do they put in tractor tires to make them heavier?

Calcium chloride is a heavy liquid and does not freeze, so was put in the tire tube to add weight. In recent years, however, manufacturers have moved toward another type of tire ballast. Iron wheel and suitcase weights were added to tractor tires and frames instead of the liquid ballast in the tires.

How much does beet juice cost for tractor tires?

Highly toxic, even to rubber and will over time attack tires and rims. It also weighs less than water. Pros: Inexpensive beet juice mixture costs approximately $0.28/lb. Weighs 10.7 – 11.0 lbs per gallon (about the same as calcium chloride).

IT IS INTERESTING:  What is position control on a tractor?

How do I know if my tractor tires are filled?

If the tires are loaded, have the valve stem at 6 O’clock position and push in the core like you are going to check pressure. If loaded you will get liquid come out instead of air. Loaded tires are usually filled to the 10 O’clock position or about 75%. This is done so the liquid in the tires is above the wheel.

Should I load my tractor tires?

Filling the tires will make the tractor more stabil on slopes and help maintain traction when pulling ground engaging tools or even with FEL use.

What are tractor tires loaded with?

Loading Liquid



The most common liquid used to load a tire is calcium chloride. Calcium chloride is inexpensive, making it a more affordable option than cast weights. You will need to calculate your tractor’s tire slippage (see References) in order to determine how much ballasting your tractor needs.

Should I put beet juice in my tractor tires?

Rim Guard Beet Juice is the optimal tire ballast for both new and antique farm tractors, front-end loaders, commercial back hoes, skid steers, all-terrain forklifts, road graders, compactors/rollers and all types of utility tractors.

How much fluid goes in a tractor tire?

For maximum traction, tube type tires should be filled to the value stem level when the tire is upright and the stem in the highest position. This is considered a 75% fill. For tubeless tires, it is recommended that the liquid level be maintained at 90% filling level so that the rim is always completely covered.

IT IS INTERESTING:  What engines do Claas tractors use?
Blog about special equipment