It’s typically reserved for the smallest garden tractors that typically can have add-on three-point hitches put on to them, not stuff that typically comes as standard equipment. Category 1 is very, very common and typically you’re gonna see Category 1 on tractors under about 50 horsepower.
What is the difference between Category 1 and 2 tractors?
Category 1 Hitch For tractors with 20 to 50 horsepower. Category 2 Hitch For tractors with 50 to 90 horsepower. Long days can seem even longer when you aren’t comfortable.
What is the difference between Cat 1 and Cat 2?
The cat 1 hitch is used on tractors from 20-45 hp. A cat 2 hitch is 32″ wide. The top link is located 24″ above the center line between the two lower lift pins. The lower lift pins are 1-1/8″ inch in diameter.
What size is a Category 1 tractor?
What are the 3-point hitch categories?
|Category||Tractor Power||Lift arm pin diameter|
|1||20-45 HP||7⁄8 in (22 mm)|
|2||40-100 HP||1 1⁄8 in (29 mm)|
|3||80-225 HP||1 7⁄16 in (37 mm)|
|4||More than 180 HP||2 in (51 mm)|
What are the different tractor categories?
In terms of basic terminology, tractor shoppers should consider the five basic model types on the market these days: Lawn tractors, sub-compact tractors, compact tractors, utility tractors, and agricultural tractors.
What is a category 0 tractor?
They are considered light-duty and accept implements that are 20″ wide. The dimension from the lower pins to the top link pin is typically 12″. Many manufacturers have made tractors with cat. … A used garden tractor with a category 0 hitch in good shape with several implements will fetch a hefty price.
What is a modified CAT 1 hitch?
Hey Tall Dog, The Simplicity 3-point hitch is called “Modified cat. 1” because the width is 26in–cat. 1 but it uses cat. 0 pins instead of cat. 1 pins and the length of the lower lift arms are shorter than a standard cat.
What is tractor drawbar?
Tractor drawbars are designed at the correct height from the ground to keep the pull forces below the center of gravity. Only use the drawbar to tow a load. A swinging or floating drawbar permits adjustment of the center line of pull to be maintained even on a hillside.
What size are Cat 0 pins?
Category 0 Top Link Pin 4-7/16″
This pin has a hole at the end that is 9/32 inches in diameter. It has a usable length of 3 inches and an overall length measuring 4-7/16 inches. The stable top link pin has a diameter measuring 5/8 inches.