Quick Answer: What causes a lawn mower blade to keep coming loose?

Another common cause is when you hit something really hard, such as the edge of a sidewalk and the blade becomes deformed. In some cases, the unnatural shape of the blade can be enough to prevent you from tightening it properly. … An unbalanced mower blade can produce vibrations that will loosen the bolt over time.

How do you fix a loose lawn mower blade?

Loose lawnmower blades are unsafe and cause damage to your mower. Mower blades must be securely fastened to the mower shaft. The best way to tighten your lawnmower blades is with a torque wrench. Torque wrenches have a gauge showing how many foot pounds of pressure you use to tighten the securing nut.

Why does my lawnmower blade keep coming loose?

If you don’t have the key in the slot or the key is broken the blade will come loose. Some adapters have the key built into the adapter. I am with Rivets on this, damaged or faulty blade adapter installation, also the fly wheel key could be sheared causing the mower to kick back.

IT IS INTERESTING:  How fast can you harvest corn?

How tight should you tighten a lawn mower blade?

The owners manual recommends torquing the blade bolt to 35-40 ft. lbs. If you have a torque wrench it is good to use it. If a torque wrench is not available, use a wrench around 12-15 inches long and tighten the bolt as tight as you can get it.

Why won’t my mower blades stay engaged?

If the PTO clutch is not getting power, if the clutch solenoid is defective, or if the clutch is worn out, the lawn mower blades will not engage. … If the switch is defective, it may not supply power to the PTO clutch. As a result, the clutch won’t engage, and the lawn mower blades won’t rotate.

What happens if you over tighten mower blades?

Can You Overtighten a Lawn Mower Blade? Unfortunately, you can overtighten your mower’s blade if you aren’t careful. This can damage the blade itself in some cases – the blade can even break after hitting a hard object if it’s overly tight.

Are mower blades meant to be loose?

Should mower blades move? The blades should not be really loose, they should be firm to move amd not that tight that you cannot move them. The reason for the blades being able to move is because if they hit an object they will swing back (so they don’t break) and then return to the correct position in operation.

Which way do you turn the bolt to remove a lawn mower blade?

To remove the blade, you must turn the blade’s retaining bolt to the left, or counterclockwise. Before undoing the blade, tip the mower on its side with the engine air cleaner facing up and block the blade with a piece of wood so it can’t turn.

IT IS INTERESTING:  Frequent question: How long can you charge a lawn mower battery?

Can lawn mower blade fly off?

Can a lawn mower blade fly off? A lawn mower blade can fly off if the blade or blade adapter is damaged. A loud rattling sound or excessive vibrations are signs that the blade is not functioning correctly. If you notice either of these problems, turn off the motor and have the machine serviced immediately.

Are lawn mower blade bolts reverse thread?

Most lawnmower blade nuts are reverse-threaded in order to secure the blade on the drive shaft of the engine. This ensures that the blade’s rotation does not loosen the nut.

Is it necessary to sharpen new mower blades?

Usually, sharpening a new lawnmower blade is not necessary. Even if your blades come with a thin layer of paint, you can use it without sharpening the paint off. … If you notice a proper cut, then your mower blades are doing a fine job. You don’t have to waste your time sharpening them.

Blog about special equipment