No, lawnmower blades normally should not spin freely as they are connected directly or indirectly via belts or other means to the engine. Only when the lawnmower has a clutch, the blades may run freely. … The blades should move freely in the housing and not touch the sides anywhere.
Are lawn mower blades meant to be loose?
Should mower blades move? The blades should not be really loose, they should be firm to move amd not that tight that you cannot move them. The reason for the blades being able to move is because if they hit an object they will swing back (so they don’t break) and then return to the correct position in operation.
Are mower blades supposed to be sharp to the touch?
Mower blades should be aggressively sharp, but not as sharp as a razor’s edge. You should be able to touch the blade with your hand without getting cut. Contrary to popular belief, a lawn mower blade with a razor sharp edge will not cut grass better.
How do I know if my lawn mower blade is unbalanced?
If one side is heavier, I grind it a little more… Eventually it becomes balanced with a little time. If you feel an awkward vibration when you are mowing, your blades are most likely unbalanced.
How long do mower deck spindles last?
Member. The maintenance free spindles usually last about 2-3 years in commercial use.
What happens if you over tighten mower blades?
Can You Overtighten a Lawn Mower Blade? Unfortunately, you can overtighten your mower’s blade if you aren’t careful. This can damage the blade itself in some cases – the blade can even break after hitting a hard object if it’s overly tight.
Do I really need a torque wrench for lawn mower blade?
Most mowers will not require using a torque wrench. The biggest benefit in using a torque wrench for the average mower will be not only to ensure you have the blade tight enough, but that you don’t tighten it so much that you can’t remove the bolt later. Blade bolts can tighten with use.
How tight should I tighten my lawn mower blade?
The owners manual recommends torquing the blade bolt to 35-40 ft. lbs. If you have a torque wrench it is good to use it. If a torque wrench is not available, use a wrench around 12-15 inches long and tighten the bolt as tight as you can get it.
How much does it cost to sharpen a lawn mower blade?
Depending on the type of your mower, you can expect to pay anywhere between 20 dollars to 60 dollars. If it’s a reel lawn mower you might not even need to take the blades off the mower and sharpen them while they’re attached.