Question: How do I read my Oliver tractor serial number?

The first five or six digits in the number is the serial number. The last three are the driveline code numbers. Your tractor, the driveline code is 873. The 8 indicates it is a 880 (this number should be a 7 on your 770), 73 is the ring & Pinion ratio.

How do you find the year of a tractor serial number?

The 8th digit of the tractor identification number corresponds to the tractor’s model year. To determine the model year, locate the 8th digit of your identification number and compare it to the appropriate table below. The 8th digit of the number is 1.

How do you read a serial number?

The first two characters of the serial number represent the year and month of manufacture. The remainder of the serial is a sequential production number, seven digits in length before December 2007 (DM), and eight digits in length after.

How do you read serial numbers on tractor cases?

Take the first and the fourth digit, and subtract three to get the year. For example, the serial number of 395602 would be: 36-3 = 1933. From around 1938 on Case adopted a seven digit numbering system. To determine the year of manufacture for a seven digit number, pre 1953, take the first two digits and subtract four.

IT IS INTERESTING:  How is farm equipment depreciation?

How do you read a Massey Ferguson serial number?

To identify your serial number look on the instrument panel below the steering column. It can also be found on models on the right side of the engine, under the battery tray.

How do I identify my Ferguson tractor?

Checking the Tractor

Locate the serial number by checking the lower left-hand side and lower right-hand side of the steering wheel panel. In addition, certain older Ferguson tractors have the serial number stamped to a plate mounted to one of these areas of the steering wheel panel.

Can I look up a serial number?

Visit the manufacturer’s website and see if there is a way to do an S/N number check on the website and see what information is available. If you don’t see that information online, give the company a call and see if someone on the tech support or customer service line can look up your product by serial number.

What can a serial number tell you?

The idea behind serial numbers is to identify a specific item, much like how a fingerprint identifies a specific person. Instead of some names or numbers that specify a whole range of products, a serial number is intended to provide a unique number to one device at a time.

Can a serial number be traced?

Serial numbers and lot numbers are tracked using barcode technology and software. With barcoding, lot numbers can be recognized when received, shipped or both, enabling products to be tracked & traced throughout the supply chain.

How do you read a Ford tractor serial number?

The hundred series and “01” series tractor serial number location is on the flat area above and behind the starter. The first number is the model number. Below that is the serial number. A diamond symbol denotes the beginning and end of the serial number.

IT IS INTERESTING:  Question: How do you store harvested crops?

How do I identify my tractor case?

Case tractors can also be identified through the manufacturer’s serial number. Write down the serial number of your Case tractor. Double check your notation for accuracy so not to transpose, omit, or repeat characters. Contact the manufacturer.

How do you decode a John Deere serial number?

Identify the next four letters and numbers after the factory code, which will be positions three to six in a 13-symbol VIN, or positions four to seven in a 17-symbol VIN. This is the model number. For instance, in the John Deere VIN CD6068G123456, 6068 is the model number.

Blog about special equipment