You asked: Why do you drive a forklift backwards?

Forklift operators spend a great deal of time driving in reverse. Large loads on the forks can sometimes obscure operator vision, making it necessary to drive backwards for maximum visibility.

Should you drive a forklift backwards?

“It would be, in my opinion, a very dangerous way to drive a forklift for a long period of time,” Iunker said. Driving in reverse while looking backward would cause the steering wheel to move more than intended, making it very hard to control, he added.

In what situation are you most likely to need to drive a forklift in reverse?

If the load is too large to see clearly over the top of the load, move the load by driving backwards. Forklift drivers must also drive backwards when going down or up an incline.

How low should forks be driving forklift?

Travel with forks as low as possible from the floor and tilted back (usually within 10-15 cm (4 to 6 inches) above the floor). Match speed to, load, presence of pedestrians, obstructions, and driving and workplace conditions, including slippery surfaces.

Can you jump off a forklift?

Only use a 12-volt negative ground battery to jump start your forklift. … Bring the booster battery as close to the dead forklift as possible so that the jumper cables reach. But make sure the trucks aren’t touching each other.

IT IS INTERESTING:  Question: What is the purpose of a lift or hoist?

How soon should repairs be made to a forklift?

The more you use your forklift, the more often you should have it serviced by a factory trained technician. A forklift that gets heavy use might require a forklift maintenance visit every 90 days. Be sure to keep a copy of the items inspected on file in case OSHA requests that information.

Blog about special equipment