You asked: What is the best plan of action if a forklift starts to tip over?

If the forklift is tipping over, protect yourself by staying put: Stay in your seat and do not attempt to jump off. Lean away from the falling direction of the lift. Hold onto the steering wheel and make sure you’re stable.

Why would a forklift tip over?

Here are examples situations that can cause a forklift to tip over: The center of gravity is on the side of the stability triangle. This might be caused by turning a corner, having an unbalanced load, driving into a pothole, or traveling on a sloping surface. … The forklift quickly accelerating in reverse, or.

What is one of the best methods for protecting operators when a forklift tips or rolls over?

Stop the truck before lifting.

Never lift a load while in motion, never stop the truck or lift while on an incline, and never travel with an elevated load.

Can you jump off a forklift?

Only use a 12-volt negative ground battery to jump start your forklift. … Bring the booster battery as close to the dead forklift as possible so that the jumper cables reach. But make sure the trucks aren’t touching each other.

Do forklifts only tip over when overloaded?

When used according to the proper guidelines, the forklift should never tip over. The following are some of the most common things that can lead to a tip: Overloading the Forklift – Each forklift is rated for a specific amount of weight.

IT IS INTERESTING:  Where is the stability triangle on a forklift?

When may you lean out of the forklift?

Operators should never lean or reach outside of the cab, as this puts them at risk of contact with passing obstructions/vehicles. Rather than reach out to access something, they should stop their truck in a suitable place, make it safe, dismount and then access it on foot.

Blog about special equipment