For instance, if a scissor lift operator is wearing a harness and goes over a lift’s guardrail, he or she could inadvertently create enough force to cause the machine to tip over. In this scenario, the operator could put himself or herself and bystanders in danger.
Do you have to wear a harness in a scissor lift?
Does OSHA Require Workers to Wear a Harness on a Scissor Lift? OSHA considers guardrails to be scissor lift fall protection. Assuming there’s an adequate guardrail system in place, scissor lift harnesses aren’t required by OSHA, but for all other situations, a personal fall restraint system is mandatory.
Can you use a scissor lift as a tie off point?
As opposed to aerial lifts, like boom lifts, workers inside the basket of a scissor lift are not required to be tied-off, if the guardrails are properly maintained.
What are four risks when scissor lifts?
OSHA states that the top hazards associated with aerial lifts are electrocutions, falls from elevations, tip-overs, collapses, being struck by falling objects, and ejections from the aerial lift platform.
Does Cal OSHA require harness on scissor lift?
Cal/OSHA reminds employers that there are two exceptions under which personal fall protection is required. tight space, then Section 3642 (a) applies and requires workers on the scissor lift to use personal fall protection equipment until the guardrails are restored.
What is the OSHA standard for scissor lifts?
While there are no OSHA provisions that specifically address scissor lifts, they do meet the definition of a scaffold (§1926.451 – general requirements for scaffolds). Employers must therefore comply with the other applicable provisions of Subpart L when using scissor lifts.
At what height must a harness be worn?
All sites are different, but generally speaking, 2 metres is the key point at which systems are required. If the height is 2 metres or more, then height safety systems are required. Similarly they are required if working within 2 metres of a fall edge.
Can you exit a scissor lift at height?
In particular, §1926.501(b)(1) requires fall protection at 6 feet above a lower level. A worker may enter or exit an aerial lift (at heights above 6 feet) provided that fall protection such as guardrails or a fall arrest system is used while the worker moves between the lift and the working surface.
Can a manlift be moved while the basket is raised?
An aerial lift truck shall not be moved when the boom is elevated in a working position with men in the basket, except for equipment which is specifically designed for this type of operation in accordance with the provisions of paragraphs (a)(1) and (2) of this section.
Can anyone use a scissor lift?
Yes, you do. Scissor lifts can be dangerous and can cause accidents leading to personal injuries as well as structural and equipment damage. Current regulations state that all personnel who work with or near scissor lifts must be trained and licenced.
What precautions should be taken when driving aerial or scissor lifts?
Keep an eye out for obstacles like debris, holes, uneven terrain or inclines. High winds and uneven ground can affect your lift even if you aren’t moving. Set the brakes and use wheel chocks when you’re on an incline. Follow the manufacturer instructions on operating your scissor lift or boom lift in high wind speeds.
Is scissor a hazard or risk?
The biggest safety hazard involved in using regular scissors is the risk of laceration from overly-sharpened blades. Metal scissors tend to dull quickly. As a result, they’re manufactured to be overly sharp in an attempt to extend the tool’s longevity. Using such a pair of scissors increases the risk of laceration.
What kind of jobs use scissor lifts?
They may also be referred to as cherry pickers or scissor lifts.
Aerial Work Platform Applications
- Construction and Building Maintenance. …
- Safety Inspections. …
- Window Washing/Repair. …
- Orchard Work. …
- Electrical Line Repair. …
- Tree Care Work. …
- Special Event and Entertainment Work. …
- Sporting Events.