When should you drive in reverse on a forklift?

The driver will slow down and sound the horn at cross aisles and other locations where vision is obstructed. If the load being carried obstructs forward view, the driver will be required to travel in reverse, with the load trailing. 29.

In what situation are you most likely to need to drive a forklift in reverse?

If the load is too large to see clearly over the top of the load, move the load by driving backwards. Forklift drivers must also drive backwards when going down or up an incline.

What should you always do before reversing the forklift?

When reversing the forklift, always do so slowly. It’s easy to lose control at speed, especially if the load you’re carrying is very heavy or bulky. Be sure to sound your horn before you reverse to alert pedestrians and other vehicular traffic of your presence.

Why do Forklifts drive backwards?

It’s a familiar problem for forklift operators: the larger the load, the poorer the visibility in front of the truck. Often the only solution is to drive in reverse. … Recent models put a greater focus on ergonomics, and include rotating seats that provide a panorama view of the load and where the truck is driving.

IT IS INTERESTING:  Quick Answer: How much space do you need between forklift racks?

Which steps should you do every time you park a forklift?

Parking Safety Rules

  • Always try to find a level surface to park on. …
  • Lower forks, or the forklift attachment, all the way to the ground. …
  • Put the gear into neutral.
  • Make sure the wheels are straight. …
  • Set the parking brake every time you park the forklift. …
  • Turn off the engine before dismounting the forklift.

Are you supposed to drive a forklift in reverse?

The driver will slow down and sound the horn at cross aisles and other locations where vision is obstructed. If the load being carried obstructs forward view, the driver will be required to travel in reverse, with the load trailing.

How much back tilt should be applied when picking up a load?

When carrying a load on level ground, the correct position of the forks is 100-150mm (4-6 Inches) off the ground and tilted back sufficiently to stabilise the load.

What should you never do with a forklift?

Avoid standing or walking under a load, lifting mechanism, or forklift attachment, as loads can fall off on anyone positioned below it. Keep hands and feet clear away from the forklift mast, as a moving mast can cause serious injury.

When parking or leaving the forklift you must remove the ignition key?

When parking a forklift, slowly bring the vehicle to a stop, set the parking brake, turn off the ignition and remove the keys. If you are parking on an incline, turn the front wheels away from the downgrade so the forklift will not slide.

IT IS INTERESTING:  Best answer: How much is a 3 inch lift on a truck?

How do you reverse a forklift?

Shift the forklift into reverse, disengage the parking brake, and use the accelerator to slowly back out from the load. Make sure not to turn or else you could knock the load over. Don’t forget to lower the fork closer to the ground before you start driving again.

Blog about special equipment