Federal OSHA requires that forklift vehicles have to be inspected at least daily, or after each shift when used around the clock. You will find this requirement in the Powered Industrial Truck standard at 1910.178(q)(7).
When should a forklift be checked for damage?
Not only is inspecting your forklift a good way to identify potential problems, but according to the Safe Work Australia Forklift Guide “A pre-start safety check should be completed every time an operator uses a different industrial lift truck and at the beginning of each shift”.
Which steps must be done daily before using a forklift?
1) Conducting a visual check
OSHA requires that all forklifts be examined at least daily before they are used to ensure that they’re in safe operating condition. If forklifts are used on a round-the-clock basis, then they must be examined after each shift.
What are 3 fluid levels that need to be checked before using the forklift?
Check of liquid Levels:
- Hydraulic fluid.
- Brake fluid.
- Engine oil coolant.
What steps should you do every time you park a forklift?
Parking Safety Rules
- Always try to find a level surface to park on. …
- Lower forks, or the forklift attachment, all the way to the ground. …
- Put the gear into neutral.
- Make sure the wheels are straight. …
- Set the parking brake every time you park the forklift. …
- Turn off the engine before dismounting the forklift.
When parking or leaving the forklift you must remove the ignition key?
When parking a forklift, slowly bring the vehicle to a stop, set the parking brake, turn off the ignition and remove the keys. If you are parking on an incline, turn the front wheels away from the downgrade so the forklift will not slide.
How much back tilt should be applied when picking up a load?
When carrying a load on level ground, the correct position of the forks is 100-150mm (4-6 Inches) off the ground and tilted back sufficiently to stabilise the load.
What is considered high hours on a forklift?
What is considered high hours on a forklift? On average, a forklift will last about 10,000 hours. Running eight hour shifts that averages out to around 2,000 hours per year or about five years. Properly maintained forklifts can last substantially longer, however, even eclipsing the 20,000 hour mark.