Counterbalance forklifts, also known as a forkift trucks, fork trucks or forklifts, are the most common type of material handling equipment and are characterised by a lifting unit, which consists of a mast and, typically, a forklift fork with 1.2 metres distance between the forks.
How far apart should forks be spaced?
For handling pallets, ideally your forks should be spaced equally apart center to the carriage/backrest, around 10 inches out from each side. But really there is no exact measurement; the best rule is to space them just a bit less from as wide as you can have them for the pallets/loads you will be handling.
How far apart can forklift forks go?
High capacity forklifts can have fork spacings as much as 9 or 10 feet. Generally, the forks can be adjusted from almost no clearance between them to the maximum spacing of the particular lift truck.
What are the 7 classes of forklifts?
HOW MANY CLASSES OF FORKLIFTS ARE THERE?
- Class I. Electric Motor Rider Trucks.
- Class II. Electric Motor Narrow Aisle Trucks.
- Class III. Electric Motor Hand or Hand/Rider Trucks.
- Class IV. Internal Combustion Engine Trucks. …
- Class V. Internal Combustion Engine Trucks. …
- Class VI. …
- Class VII.
When picking up a load forks should be spaced?
The forks should be at least two-thirds the length of the load. The mast must be carefully tilted backward to stabilize the load. Ensure the load is secured before moving. Slowly move the truck to 20 to 30 cm (8 to 12 inches) away from the stack.
What is a Class 2 forklift?
Class II forklifts are electric, narrow aisle models. As the name suggests, Class II forklifts are designed with maneuverability that allows them to operate in tight spaces and narrow aisles.
Are forklift forks universal?
People who don’t work with forklifts all the time often assume that there is only one type of forks that fit onto lift trucks. There are actually many different types of forks, most of which are interchangeable depending on how you plan to use your forklift. Forklifts can different types of forks.
What is maximum fork height?
Maximum fork height is the distance from the ground to the lifting surface of the forks with the mast fully lifted. A common height is 188 inches or 15’8”. While many fork heights are available, this mast is about as high as you can have and still work in a typical semi-trailer.
When traveling with a load the load should be lifted How high?
Lift the load and tilt it back a little more before traveling. Keep the forks 6 to 10 inches above the ground to avoid potential hazards on the ground. Remember that forklifts are top-heavy. Carry the load low and tilted back.
How high is a 2 stage forklift?
A typical two stage mast for a forklift with a capacity from 2,000 lbs. to 6,000 lbs. will have approximately 130″ of maximum lift and will be around 83-88″ Overall Height Lowered (OAHL). Two stage masts are very common in high capacity forklifts of 15,000 lbs.