Q: What is the safest position for your forklift when you are driving down a ramp with an empty forklift? A: When driving down a ramp with an empty forklift, travel in reverse and keep the lift’s forks pointed downward.
When driving a loaded forklift down a ramp in what direction should the forks point?
When descending a ramp with a loaded forklift, always travel in reverse with the forks and payload pointed up the grade.
What is the safest way to drive a forklift?
Stay Safe While Using A Forklift
Ensure both forks are as far under the load as possible before lifting. Drive with the load as low as safely possible. Pay attention to posted speed limits and warning signs. Always look in the direction you’re traveling; if a load blocks the view ahead, travel in reverse.
Why is it dangerous to turn a forklift on a ramp or slope?
Not only can operators be at risk when travelling recklessly on slopes but the safety of pedestrians is also compromised. The load in which the forklift operator may be transporting can also be significantly damaged or even destroyed if safety precautions are not followed within this situation.
How much back tilt should be applied when picking up a load?
When carrying a load on level ground, the correct position of the forks is 100-150mm (4-6 Inches) off the ground and tilted back sufficiently to stabilise the load.
Can a forklift tip over without a load?
Forklift Safety Rule Two: Don’t tip over. Many untrained operators assume that they can drive faster without a load, but look at the location of the CG with unloaded forks. It is much closer to the sides of the triangle compared with the unloaded location.
How soon should repairs be made to a forklift?
The more you use your forklift, the more often you should have it serviced by a factory trained technician. A forklift that gets heavy use might require a forklift maintenance visit every 90 days. Be sure to keep a copy of the items inspected on file in case OSHA requests that information.
What can you not do with a forklift?
Forklift operators should never:
- Raise or lower loads while the forklift is moving and especially not while turning because it makes the forklift very unstable. …
- Allow anyone to stand underneath or right next to raised forks. …
- Carry a load with only one fork as it stresses the carriage.
What is the most important safety device on a forklift?
5 most important safety devices on a forklift
- Brakes. Brakes are the absolute most important safety feature on any motorized vehicle. …
- Seatbelts. …
- Overhead guards. …
- Lights. …
What are 3 fluid levels that need to be checked before using the forklift?
Check of liquid Levels:
- Hydraulic fluid.
- Brake fluid.
- Engine oil coolant.