What are forklift tines?

Forklift forks, also known as tines or blades, are used to lift and carry loads. They are an integral part of the forklift and ensuring you are using the correct ones and that they are in good condition is essential to both the safety of personnel, but also the forklift and the load.

How far apart are forklift tines?

Counterbalance forklifts, also known as a forkift trucks, fork trucks or forklifts, are the most common type of material handling equipment and are characterised by a lifting unit, which consists of a mast and, typically, a forklift fork with 1.2 metres distance between the forks.

What are 3 types of forklift trucks?

What are the different Forklift types?

  • Class I: Electric Motor Rider Forklifts.
  • Class II: Electric Motor Narrow Aisle Forklifts (Reach Trucks, Order Pickers)
  • Class III: Electric Pallet Jacks, Stackers, and Tow Tractors.
  • Class IV: Internal Combustion Cushion Tire Forklifts.

Can a forklift kill you?

According to the Bureau of Labor and Statistics, nearly 100 workers are killed and another 20,000 are seriously injured in forklift-related incidents annually. Statistically, that means one of every ten forklifts in the US will be involved in an accident every year.

How do you read forklift forks?

Length can be given in mm or inches, common lengths are 48” inch, 72” inch and 96” inch. Width (W) = width of the fork at its widest point. Thickness (T) = thickness of the forks is measure on the shank. To measure if the forks have worn then compare the thickness of the blade to the thickness of the shank.

IT IS INTERESTING:  Is it worth lifting a 2WD truck?

What grade of steel are forklift forks?

Forklift tines are usually made from 4340, a very tough steel.

How wide do forklift forks go?

60-inch and 72-inch forks are highly desired for their reach or for their ability to handle two pallets at one time. Fork Width – Fork width is commonly 4-inches for Class II, 5-inches for Class III, and 6-inches for Class IV. This keeps them within their capacity limits for their classes.

What are the 7 classes of forklifts?

HOW MANY CLASSES OF FORKLIFTS ARE THERE?

  • Class I. Electric Motor Rider Trucks.
  • Class II. Electric Motor Narrow Aisle Trucks.
  • Class III. Electric Motor Hand or Hand/Rider Trucks.
  • Class IV. Internal Combustion Engine Trucks. …
  • Class V. Internal Combustion Engine Trucks. …
  • Class VI. …
  • Class VII.

Is forklift driving hard?

Driving a forklift isn’t all cake, roses, and gas pedals. It’s going to be hard work. … Operating a forklift is considered a “hazardous occupation,” according to the Fair Labor Standards Act. As with any big machine, accidents happen.

Why forklift is dangerous?

There are many factors that explain why forklifts are dangerous: Forklifts are heavy. … The weight of a forklift is unevenly distributed, which makes it harder to operate and drive. The rear wheels of a forklift are responsible for turning the vehicle, increasing the chances of tipping during tight turns.

Blog about special equipment