Quick Answer: Why is rear end swing dangerous when using a forklift?

Rear end swing is dangerous to pedestrians because the tail of the forklift can swing very swiftly growing the capacity to weigh down pedestrians.

What is rear end swing forklift?

Forklift trucks steer from the rear axle and pivot on the front wheels, the rear end (counterweight) swinging wide when turning. Ensure that the rear end swings clear of materials, racks equipment and pedestrians when rounding corners or manoeuvring in aisle and tight places.

What does rear end swing mean?

Definitions: Rear-End Swing: Rear-end swing is the rapid sideways movement of the rear end of the forklift when turning the machine. The rear of the machine will swing out to the opposite side to which you are turning.

How high should you carry a load on a forklift?

Carrying the load

Keep the forks 6 to 10 inches above the ground to avoid potential hazards on the ground. Remember that forklifts are top-heavy. Carry the load low and tilted back. Use caution when carrying a load on an uneven surface; it creates a tip-over hazard.

What are 3 fluid levels that need to be checked before using the forklift?

Check of liquid Levels:

  • Hydraulic fluid.
  • Brake fluid.
  • Engine oil coolant.
  • Battery.
  • Fuel.
IT IS INTERESTING:  Are hydraulic lifts safe?

Why do forklifts turn from the back?

Because the back end pivots around the front, rear wheel steering allows for very sharp turns and high-precision mobility in narrow spaces. Many Indiana warehouses need this kind of maneuverability so that pallets can be loaded and unloaded quickly with a great deal of accuracy.

When picking up a load the forks should be?

Answer Expert Verified. Answer: When picking up a load the correct fork spacing should be 6 inches and also the forks must be spaced as wide apart as necessary for the maximum support of the load.

What will happen if the combined center of gravity?

What will happen if the ” Combined Center of Gravity” moves outside the stability triangle? The lift truck will tip over in the same direction. As the load center increases the capacity increases.

Blog about special equipment