Locate the emergency brake lever on the left side of the machine and make sure it’s pulled down and activated. Put the key into the ignition on the right side of the steering column and turn it forward to start the forklift’s engine.
How do you steer a forklift?
In a car or truck, the front wheels steer the vehicle. However, a forklift has the steering wheels in the rear end of the forklift so it can swing in a circle around the front wheels that support most of the load. This allows the forklift to rotate the load into the correct position.
What allows you to turn on a forklift?
Cars and trucks use their front wheels to steer. But a forklift uses its rear wheels, which allows it to turn in a very tight circle. But it means that the back end can swing out when turning.
When should I turn on my forklift?
The steering wheel should be turned in the appropriate direction when the turning point of the truck is level with the middle of the drum or cone. On a counterbalanced forklift truck it is usual to get the trainees to turn to the left during the first exercise as visibility to this side of the truck is better.
What happens when you steer the forklift?
Most forklifts have rear-wheel steering. Now, if you turn the steering wheel left, your back tires pivot around the front tires, giving you a much tighter turn. However, pivoting means the back tires move much quicker than the front tires.
Is forklift driving hard?
Driving a forklift isn’t all cake, roses, and gas pedals. It’s going to be hard work. … Operating a forklift is considered a “hazardous occupation,” according to the Fair Labor Standards Act. As with any big machine, accidents happen.
How do you control a forklift?
Make sure the truck is placed squarely in front of the load. Make sure the forks are at the correct height for lifting the load. Set the direction control to neutral. Never raise or lower the forks unless the forklift is stopped and the brake is set.
How do you start a forklift sit down?
Open the valve on the propane tank behind the seat to ensure that there is fuel for the forklift to run on. Take a seat on the forklift and fasten your seat belt. Put the transmission in neutral and turn the ignition key, similar to an automobile, until the engine starts up.