How do you park a forklift?

Lower the forks to the floor when parking the forklift. Make sure that the forks touch the ground when you are leaving. Apply the parking brake when it is the idle position. All operational controls of the truck must be in the neutral position before the driver alight the forklift compartment.

What are the steps to park a forklift?

Parking Safety Rules

  1. Always try to find a level surface to park on. …
  2. Lower forks, or the forklift attachment, all the way to the ground. …
  3. Put the gear into neutral.
  4. Make sure the wheels are straight. …
  5. Set the parking brake every time you park the forklift. …
  6. Turn off the engine before dismounting the forklift.

Where is a safe considerate place to park a forklift?

The company should designate safe areas for the employees to park their forklifts. These parking areas must not obstruct any walkways or exits. When parking a forklift, slowly bring the vehicle to a stop, set the parking brake, turn off the ignition and remove the keys.

When parking a lift truck the forks should be raised off the ground?

A properly trained operator will carry his forks or load 4-6 inches off the ground. This position is high enough to reduce contact with dock plates, expansion joints in concrete, uneven areas, slight slopes, inclines and debris on operating surfaces.

IT IS INTERESTING:  Quick Answer: Why is rear end swing dangerous when using a forklift?

When you leave your forklift you need to shut the engine off if?

If the operator goes 25 feet or more away from the truck, or is out of sight of the truck, the engine must be shut off, and the operator must have the key in his or her possession. Visibility: The operator must always have a clear view of the path in the direction of travel.

Is it illegal to leave keys in a forklift?

You might not be aware but it is actually illegal to leave the keys in an unattended Forklift. This measure is to prevent unauthorised use of the Forklift. … All forklifts and plant equipment can be fitted with low cost Driver Identification systems which prevent unauthorised usage.

When traveling with empty forklift the forks should be in what position?

When travelling in an empty forklift, the forks of the lift should be in the position of waist high.

The Material Handling Equipment Distributors Association (MHEDA) recommends a max speed of 8 mph in general and a 3 mph max speed in areas where pedestrians are present.

Blog about special equipment