Frequent question: Are you allowed to add extra counterweight to a forklift?

A commonly-held and dangerous myth is that you can increase a forklift’s capacity by adding more weight to the counterbalance. This is not enable the lift truck to carry more weight. It does, however, negatively affect the forklift’s handling and stability.

Are you allowed to add additional counterweights to a forklift?

Are you allowed to put more counterweight on a forklift without checking the manufacturer’s instructions? Operators must be trained and authorised. Do not operate the lift truck if it is in need of repair. This capacity plate is not transferable and is invalidated by any change to specifications.

Can you add weight to the back of a forklift?

Adding extra counterweight is forbidden – either human or metal! Trying to increase the capacity of the forklift truck in this way is both illegal and dangerous. The other way to add extra counterweight is shown below!

Is it permissible to overload a forklift by 25% if additional counterweights are used?

It is permissible to overload the truck by 25% if additional counterweights are used. 13. It is good practice to keep the load back against the truck mast as much as possible.

IT IS INTERESTING:  Frequent question: Are all forklifts yellow?

What are two guards fitted to a forklift?

It’s vital to keep your whole body within the bounds of the forklift and under the overhead guard. The overhead guard is intended for protection while an operator is within the confines of the seat.

What are 3 fluid levels that need to be checked before using the forklift?

Check of liquid Levels:

  • Hydraulic fluid.
  • Brake fluid.
  • Engine oil coolant.
  • Battery.
  • Fuel.

When picking up a load the forks should be?

Answer Expert Verified. Answer: When picking up a load the correct fork spacing should be 6 inches and also the forks must be spaced as wide apart as necessary for the maximum support of the load.

How much can a 5000 lb forklift lift?

A 5,000-lb. capacity forklift will lift that much weight up to 48-inch forks (with a 24-inch load center) but going out to 60 inches (with a 30-inch load center), for example, drops the capacity to 4,000 pounds.

Which steps should you do every time you park a forklift?

Parking Safety Rules

  • Always try to find a level surface to park on. …
  • Lower forks, or the forklift attachment, all the way to the ground. …
  • Put the gear into neutral.
  • Make sure the wheels are straight. …
  • Set the parking brake every time you park the forklift. …
  • Turn off the engine before dismounting the forklift.

What happens when a forklift is overloaded on the tip of the fork?

Deadly Danger # 1—Forklift Turnovers

Forklifts can easily tip if they are overloaded, if the load is not well balanced, or if they travel with the forks too high. How it can happen: A forklift operator was killed when his forklift overturned when he was turning while backing down an incline.

IT IS INTERESTING:  You asked: How does a hydraulic lift system work?
Blog about special equipment