Operators should yield the right of way to pedestrians: This is an OSHA recommendation that all forklift drivers should be aware of. Because of the size and power of the forklift, operators should stop and wait for pedestrians to clear the area before proceeding along their route with caution.
Who has the right of way on forklifts?
Who Has the Right of Way on a Forklift? Who has the right of way: a forklift operator or a pedestrian? The answer: pedestrians always have the right of way. Forklift operators must account for pedestrians at all times.
When approaching an intersection on a forklift you should?
Instead, approach parallel to the person. Don’t let anyone walk or stand under the elevated forks. Stay at least three forklift lengths away from forklifts ahead of you. Don’t pass a forklift traveling in the same direction if you’re at a blind spot, an intersection, or any other dangerous spots.
What are the forklift rules of the road?
Never drive with the forks up, and never use the forklift to push other vehicles. Never pass a forklift going in the same direction, especially at blind spots, intersections, or other dangerous areas. Obey floor markings, speed limits, and road signs.
Can you leave keys in a forklift?
Never leave an operating forklift unattended.
In fact, leaving keys in an unattended forklift (or, thus, leaving on the ignition of this vehicle) is illegal, and has dire consequences as a safety hazard, even without the actual occurrence of an accident. Know and never exceed the lifting capacity of the forklift.
Is it okay to allow a co worker to hitch a ride on your forklift If you?
It is never OK to allow a pedestrian or even a co-worker to hitch a ride on the forklift. This equipment is to be occupied only by the forklift operator himself. No other person is allowed to ride on the forks, on the sides and even on the back of the equipment. This is a serious safety violation.
Can I drive my forklift on the road?
If you’re plan on operating a forklift truck on a public road, then you’ll need to adhere to certain requirements: The forklift must be registered with the DVLA. It must be taxed and insured for road use. Registration plates must be displayed on the forklift.
How many feet does it take for a forklift to come to a complete stop?
Obey speed limits, floor markings and any other road signs. Remember it takes a forklift traveling at 10 mph about 22 feet to come to a full stop on a dry surface. Slow down when driving on slippery or wet surfaces since the stopping distance is greatly increased. Report any and all crashes to your supervisor.